«PROMF» Industry Group
tel.: +38-050-63-62-911 viber

facebook Google+ Twitter Youtube

Supplier of equipments for food industry
This email address is being protected from spambots. You need JavaScript enabled to view it.

Tanks А9-КЕС 50 cubic meters. stainless steel (the bottom in the shape of a cone, 7862)

Резервуары А9-КЕС 50 м.куб. из нержавеющей стали

The deviceand principle of work:

The tanks consist of the following parts: tank, tank, the cross pipe, cover, reliance, device cleaning, truck, drive. The tank is a vertical cylindrical thin-wall stainless steel construction, mounted on six pillars and consists of cylindrical shell, shirt, top, bottoms and lower bottoms. (tank A9-CES without a shirt).

Shirt is welded to the cylindrical shell and has an inlet located at the bottom and the outlet located at the top of the shirt. The pipes are used for inlet and outlet of the cooling brine. The bottom is conical with a flange with cone angle of 120°. On the conical surface of the upper bottom is the entrance to an overflow pipe at a height that ensures the filling of the vessel with product. On the bottom the bottom is an outlet that serves for the loading and unloading of the semi-finished product, and also for draining the water or cleaning solution in the sanitize tank.

The neck is provided with shutoff valves, with four valves and a directional pad. At the tops bottoms bottom mounted pressure gauge with diaphragm separator, showing the height of the column of product in the tank. The reservoir includes a conduit for decantation of the juice, which connects the valve with the lower part of the cylindrical shell of the tank.

For washing tank and penetrate, if necessary, working inside the tank, a manhole, located in a cylindrical shell at the height 2345 mm from floor level. At the level of the hatch at diametrically opposite sides of cylindrical shells installed two drives (agitators) serving for mixing the juice during its processing. Near the inlet into the jacket on cylindrical shell installed a thermometer showing the temperature of the juice in the tank and having output terminals for position throttling flow of the cooling brine in the jacket of the tank.

The lower end of the overflow pipe is connected to the tank that has the shutoff enamelled diaphragm valve, safety valve, vacuum pressure gauge with diaphragm separator, level gauge and pressure relief device consisting of the upper membrane, lower membrane, substrates, rings, covers. Bearings in the bottom end with the connections with holes that serve for fastening them to the Foundation. To the upper bottom of the tank welded to the sling device.

Work with reservoir involves the following technological processes:

  • sanitary treatment;
  • download prefabricated to the tank;
  • оprocessing of the material;
  • unloading of the semi-finished product from the reservoir;
  • maintenance of the reservoir the operator III category.

Technical characteristics of the installations

Name of parameters



Useful capacity,m3, notless




Overall dimensions, mmnotmore




Mass, kg, not more




Automation coefficient, not less


Occupied area, m2, not more




Installed power, kW


Energy consumption, kW*h


The temperature of the juicein the tank, ºC


The flow rateof the coolingagenttemperature
above 20oCat a temperature
environmentno higher than18ºC, m3/h


Setthe resourcetocapital
repairno less than, h


Fixed a resourcefullh


Installed failure operating timeh


FeedBack Form

Analogous and similar equipment

Drying for milk or whey (id: 181130)

  Drying for milk or whey,as well as yeast and other substances Productivity: 700 kg/h Completeness: vacuum evaporation units at 5000 l per hour using evaporated moisture 2 pcs.

Diesel generator 16kw PAD-163/400 (Poland, 181128-01)

    Condition: used Power: 16kW Operating voltage: 230V Operating current: 29A Frequency: 50 Hz Number of phases: 3 Weight: 2400 kg

Processed cheese filling and wrapping machine - ARU (18102902)

    Processed cheese filling and wrapping machine – ARU – automatic packaging machine for foiling of processed and cream cheese with aluminum foil with or without easy opening system...

Butter packing machine - ARM (18102901)

    Butter packing machine – ARM designed for filling and wrapping butter, margarine, etc. into aluminum foil or parchment paper. Machine modifications covers a wide dosing range – 8...

Complete cheese processing line (180912)

  List of equipment in the line for cheese processing 3 x cheese vats Wash water tank Interseptor pump and whey suck off pump associated pipework and platform 2 x buffer tanks 3 x feed pumps and...

STEPHAN complete emulsifying line (year 1991, id:1470)

  STEPHAN complete emulsifying line (year 1991, id:1470) 1 x STEPHAN TC600 mixer High-Speed Cooker/Mixer Processed cheese block and analog Horseradish, TC 600 Batch Size (L): 200 up to 420...

Kustner YH Processed Cheese Wrapping Machine

  Featuers of the Kustner YH Processed Cheese Wrapping Machine: Model: YH Capacity: 45 - 50 strokes/minute Portion size: 16.25 grams - 22.5 grams (depended on product) Pack size: 130 - 180 grams...

Stainless steel tanks 25 m3, steel 12Х18Н10Т

  Vertical tanks with a capacity of 25 m3. Quantity - 50 pcs., Sale of stainless vertical tanks, the volume of 25 cubic meters. With a cooling belt, heating. Wall 5 mm Intended for pressure....